Flex M Class Dust Extractor

The new Flex Class M safety vacuum cleaner has a high-performance turbine that ensures both a high suction capacity and a high vacuum for top class extraction

Continuous automatic flat filter cleaning ensures no loss of suction
Teflon coated flat folded filter allows optimum use of the tank volume
For all dusts with OEL values = 0.1 mg/m³
Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of = 20m/s
The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
Suitable for wet vacuuming: with electronic liquid level control
Soft start stops any voltage peaks at the start and the run-on feature empties remaining dust in the vacuum hose
Simple filter change without removing the suction head
4 clamping loops (2 on each side ) for attaching straps and a giraffe holder
This is a 240V unit

Includes accessories:
Antistatic hose (406.708)
1 L-BOXX® holder (445.169)
1 flat-fold filter PES L/M/H (445.118)
1 fleece filter bag class L/M (445.088)
1 PP waste disposal bag (445.061)
1 adapter Ø 25-32 mm, antistatic (445.029)
Hose clip 2 pieces (x2)

Technical data:
TECHNICAL DATA
Power consumption 1200 W
Voltage 230 V
Frequency 50/60Hz Hz
Vacuum cleaner flow rate 4500 m³/h
Max. vacuum 25000 Pa
Filter surface area 5000 cm²
Tank volume 30 L
Liquid capacity 17 L
Suction power control mechanical
Hose length 4m
Number of suction motors 1 Cont.
Cable length 7.5 m
Dimensions WxLxH 565 x 385 x 565 mm
Weight 15.2 kg